3 4

16Zerostart

ZE 3400017 • 200 watt - 120 Volt AC • UL/CSA approved • Includes 6” cordset • Quick grip handle protects hands from heat • Built-in thermostat maintains optimum temperature. Will not exceed 250°F MAGNETIC HEATER NOW STOCKING A FULL LINE ENGINE HEATERS Give One of Our Locations a Call or Visit our website at www.midwestwheel.com For Applications & Part Numbers COLD WEATHER STARTING PRODUCTS • Provides a secondary heat source in trucks, sleeper cabs, buses, & off-road equipment • 2-speed reversible fan motors • 20-gauge construction • Installation kit included CAB & CARGO HEATERS Model 100 Model 500 P/N Volt Capacity BTU Current (Amps) Dimensions Dimensions Outlet Direction (See Photos) MODEL 100 ZE 7000101 12 17,500 3.9 7.5 x 8.6 x 7.7” Rear Top MODEL 500 ZE 7000501 12 17,500 4.4 7.6 x 8.5 x 4.3” Bottom Right ZE 7000502 12 17,500 4.4 7.6 x 8.5 x 4.3” Rear Right CATALOG NUMBER 16 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE™ P/N Watt Volt Description Thermostat ZE 3308003 1500 120 5/8” Inlet & Outlet No TANK/CIRCULATION HEATERS • Transfers heat from engine coolant to the fuel just before the fuel filter for maximum efficiency • Eliminates clogged fuel filters when temperatures are below 10°F (-12°C) • Exclusive stainless steel construction with no internal welds prevents coolant from leaking into fuel Pressure Drop .........................................less than 0.05 psi Maximum operating pressure ...................................75 psi Maximum operating temperature .................350°F (177°C) Test pressure .........................................................100 psi Weight (without bracket) .................................2 lbs. (907g) Lower Operating Costs by Using #2 Fuel All Year ZE 8208751 HEAVY DUTY IN-LINE FUEL HEATER P/N Applications ZE 8203237 Caterpillar, Cummins, Detroit Diesel, Ford, International DIESEL STARTING FLUID SYSTEMS D.O.T. APPROVED REPLACEMENT STARTING FLUID CYLINDERS P/N Description Size Nozzle ZE 8200327 18 oz. 1” neck (used with most kits) 3” x 11” 1” - 20 ZE 8201277 21 oz. 1” neck (Fits Dieselmatic® kits) 4” x 8” 1” - 20 • Minimal pressure drop • Can be used as a heat exchanger in some hydraulic applications • Port size: 1/2 - 14 NPT (Heavy-Duty) Threaded Cord Nut Silicone Connector WP Male Plug P/N Volts Amps Ga. Lengths ZE 8608059 125 15 14 (1) 7 ft. , (1)10 ft. For use with two heaters PARALLEL WEATHERPROOF “Y” CORDSET

2 BLOCK HEATERS P/N Watt Volt Diameter Type Caterpillar 04-06 C11 ACERT, C13 ACERT, 04-06 C11, C13 ZE 3500075 1500 120 1-5/16” STOR Immersion 04-06 ACERT C9, C15, C16 ZE 3500077 1500 120 1-3/16” THD Immersion 04-07 C7 ACERT, 3114 (4.4L), 3116 (6.6L), 3126 (7.2L), 3126B (7.2L), CFE (Cat/Freightliner Engine), All years for previous engines prior to 2004 C7 (7.2L) ZE 3500015 1000 120 44 mm Freeze Plug ZE 3500081 1500 120 44 mm Freeze Plug 3196 ZE 3500013 1500 120 1” NPT Immersion 3406E, 3456, 15.8L (600 hp) (1998 models only) ZE 3500033 1500 120 1” NPT Immersion 2007 & NEWER CAT C13 ACERT & C15 ACERT ZE 3500111 1500 120 1-3/16” #14 STOR Immersion Cummins 1987-2002 B Series: 4B3.9 & 4BT3.9 (3.9L 239 CID 4 Cyl.) Through Model Year ‘02 6B5.9 & 6BT5.9 (5.9L 359 CID 6 Cyl.) ZE 3500030 750 120 58 mm Freeze Plug 2007 ISB 6.7L & QSB (6.7L & 4.5L) ISB, QSB Series (3.9L & 5.9L 4/6 Cyl.), (Encore) ZE 3500022 750 120 3/4” NPT Immersion Signature 600, ISX, QSX (15L - 915 CID) ZE 3500038 1500 120 Plate Immersion L10 (10L, 611 CID 6 Cyl.), M11, 15M Series, QSM11 ZE 8600015 1500 120 33 mm thd. Immersion N Series (855 CID-14 litre 315, N-14-330, N14-330E N-14-460, etc.), Big Cam IV, New Big Cam IV, 88NT, 444 ZE 8601046 1500 120 Plate Immersion N Series, Big Cam IV, New Big Cam IV, 88NT, (alternate installation) ZE 8601526 1500 120 Plate Immersion 2007 & Newer, ISX, QSX) ZE 3500107 1500 120 26 mm Immersion ISC, QSC Series (8.3L 505 CID), ISL Series (8.9L 543 CID) ZE 3500032 1000 120 3/4” NPT Immersion M11 (11L) (2000 and newer) ZE 3500042 1500 120 Plate Immersion Detroit Diesel 8.2L (501 CID) ZE 3500043 1000 120 3/4” NPT Immersion Series 40 (6.7L 408 CID, 7.6L 466 CID, 8.7L 530 CID) ZE 3500044 1250 120 1-1/4” NPT Freeze Plug 640 (Z-Series 8 cyl.) ZE 8605556 1500 120 1” NPT Immersion Series 40 (466 CID) (engines mfg. prior to Sept. 1993) ZE 8608512 1250 120 1-1/4” Freeze Plug P/N Watt Volt Diameter Type Ford 1460 (8.3L 505 6 cyl. - Cummins C Series) ZE 8601860 1000 120 58 mm Freeze Plug International by Navistar 2001-2003 DT466 High Torque, DT466, DT466E, HT 530, DT530 ZE 3500054 1250 120 1-1/4” Immersion 2007 & Newer MaxxForce DT, MaxxForce 9 & 10 ZE 3500163 1250 120 1-1/4” Freeze Plug John Deere All 4230, 4430, 4630, 6030, 7020, 7520 ZE 8602050 1000 120 2” Freeze Plug Mack 2004-2006 Aset Engine Series (AL, AC + AM) (12.0L) E7 & EM7 (12.0L) ZE 8607206 1500 120 1-3/8” NPT Freeze Plug Mercedes MBE4000 Series / OM460 ZE 3500080 1500 120 Plate Immersion 2004 & Newer MBE4000 Series/OM460 ZE 3500082 1500 120 Plate Immersion MBE900 Series: OM904 & OM906 ZE 3500046 1000 120 60 mm Immersion Volvo 2002 & Newer VED-12 ZE 3500091 1500 120 Plate Immersion Coolant Dam Pressure Tester APPLICATIONS • Changing heater hoses, fan sensors, temperature sensors • Installing shut-off valves for fuel warmers & separators • Replacing cab heater cores • Replacing heater control valves FEATURES • Creates a vacuum, holding coolant inside the engine without hand pumping or running the engine • Quickly converts the unit from vacuum to a pressure tester • No need to drain the block for simple repairs • Coolant Filling AR T-1000 2-in-1 Shop Tool – Coolant Dam pulls a vacuum on the cooling system through the radiator cap allowing repairs to be done in less time while not completely draining the coolant out and then, changes over to a pressure tester after the repair has been completed.

3 Weatherproof Cordsets & Accessories 8605688 8608652 8605254 P/N Description Voltage Cord Length Wire Gauge Receptacle Specifications ZE 8605688 Weatherproof field-wired receptacle - chrome plated 120 - - 4-hole square ZE 8605645 Replacement rubber boot for WP receptacle - - - ZE 8605254 Replacement male plug for WP receptacle kit 120 - - ZE 8606013 WP silicone cordset & chrome plated receptacle 120 10 ft. 16 4-hole square ZE 8606048 Mounting bracket - chrome plated - - - 2 & 4 hole square ZE 8606080 Receptacle only - black - - - 4-hole square ZE 8608652 Weatherproof cordset with silicone connector 120 7 ft. 14 - ZE 8608814 Weatherproof cordset with silicone connector 120 10 ft. 14 - ZE 8608849 Weatherproof cordset with silicone connector 120 5.5 ft. 14 - ZE 8608865 Weatherproof cordset with silicone connector 120 14 ft. 14 - ZE 8608032 Square receptacle - - - 2-hole with gasket Series Y-Cords & Thermostats Use with one thermostat & one heater Freeze Plug Replacement Cordsets 3600006 Heavy Duty Immersion Heater Replacement Cordset Engine Immersion Heater LED Indicator Light System Standard Kit includes weatherproof housing and 6 ft. cord ZE 3600049 Specially designed wire harness with two-light system allows operators or fleet personnel to quickly determine both power availability and heater operation • Indicator lights visible up to 150 ft. • 120 Volt - 15 Amp rating • Minimum wattage required is 150W • Chrome plated, four-hole mount square flange weatherproof receptacle with gasket P/N Length Description ZE 3600006 5 ft. Silicone cord with 90° connector (steel heaters) ZE 3600024 1 ft. Heavy duty replacement cord P/N Length Voltage GA ZE 3600008 6 ft. 120 16 P/N Length Voltage GA Characteristics ZE 3600064 6/6 ft. 120 16 2 6 ft. lengths - flat wire Arctic Blue All Weather Extension Cords 12/3 SJEOW Blue/Orange w/ Primelok® & Primelight® P/N Length PWCLT530825 25 ft. PWCLT530830 50 ft. PWCLT530835 100 ft. • Water & Oil Resistant • Flame Retardant • Ultra Flexible • Abrasion Resistant • Nickel-Coated Brass Blades Resist Corrosion • Flexible Temperature Range (-58F - +221F) • Primelight® Indicator Light • Primelok® Locking Connector P/N Mount CA CCA Res. Cap Min. DEK31S925 Stud 1135 925 170 DEK31P925 Post 1135 925 170 DEK1131MF Top Stud 1170 950 175 DEK1131PMF Top Post 1140 950 175 GROUP 31 BATTERIES Winter Fuel Treatments

4 MIDWESTWHEEL.COM MEMBER KANSAS CITY 5801 E. Front St. Main ....(816) 471-1552 Parts....(800) 821-7402 JOPLIN 2424 Stephens Blvd. Main ....(417) 717-6022 Parts....(866) 318-9111 SPRINGFIELD 812 Lillian Dr. ∙ Strafford, MO Main ....(417) 429-2476 Parts....(800) 785-3705 SIOUX CITY 1819 4th St. Main ....(712) 252-7969 Parts....(800) 943-3534 CEDAR RAPIDS 200 50th Ave. S.W. Main ....(319) 365-4453 Parts....(800) 332-5435 DES MOINES 1436 E. Ovid Ave. Main ....(515) 265-1491 Parts....(800) 888-0248 CLEAR LAKE 840 Hwy. 18 W. Main ....(641) 357-7101 Parts....(800) 397-5630 DAVENPORT 8502 Northwest Blvd. Main ....(563) 322-2671 Parts....(800) 553-1886 OMAHA 5822 F St. Main ....(531) 239-3050 Parts....(800) 322-8757 NEBRASKA IOWA MISSOURI P/N Min. Dia. Max. Dia. IDL62040 51 7/32" 5/8" HDABRE3506C 1/4" 25/32" AUT561.20006 7/16" 25/32" AUT561.20008 1/2" 29/32" AUT561.20010 7/16" 1-1/16" AUT561.20012 11/16" 1-1/4" AUT561.20016 13/16" 1-1/2" IDL5720 051 13/16" 1-3/4" IDL5724 051 1-1/16" 2" IDL5728 051 1-5/16" 2-1/4" AUT561.20032 1-9/16" 2-1/2" IDL5736 051 1-13/16" 2-3/4" IDL5740 051 2-1/16" 3" AUT561.20044 2-5/16" 3-1/4" P/N Min. Dia. Max. Dia. IDL6506E 51 9/16" 13/16" IDL6508E 51 11/16" 15/16" AUT561.27410 9/16" 1-1/16" IDL6512E 51 15/16" 1-1/4" IDL6516E 51 13/16" 1-1/2" IDL6520E 51 13/16" 1-3/4" IDL6524E 51 1-1/16" 2" IDL6528E 51 1-5/16" 2-1/4" IDL6532E 51 1-9/16" 2-1/2" AUT561.27436 1-13/16" 2-3/4" IDL6540E 51 2-1/16" 3" P/N Min. Dia.Max. Dia. AUT561.2410-B 9/16" 1-1/16" AUT561.2412-B 11/16" 1-1/4" AUT561.2416-B 13/16" 1-1/2" AUT561.2420-B 13/16" 1-3/4" AUT561.2424-B 1-1/16" 2" AUT561.25200-B 1-1/4" 2-1/8" AUT561.25250-B 1-3/4" 2-5/8" AUT561.25300-B 2-1/4" 3-1/8" AUT561.25350-B 2-3/4" 3-5/8" General Purpose Lined Clamps Constant Torque P/N Min. Dia. Max. Dia. IDL5748 051 2-9/16" 3-1/2" IDL5752 051 2-13/16" 3-3/4" IDL5756 051 3-1/16" 4" IDL5764 051 3-9/16" 4-1/2" IDL5772 051 1-7/8" 5" IDL5788 051 3-1/8" 6" IDL5796 051 3-5/8" 6-1/2" BELTS HOSE BARB FITTINGS INSULONE® HEATER HOSE Designed for heater hose applications with resistance to high underhood temperatures. Temperature Range: -40°F to 257°F (-40°C to 125°C) P/N ID (in.) DY 80314 5/8 DY 80316 3/4 DY 80319 1 Silicone heater hose is used for coolant transfer applications and higher temperature service. Temperature Range: -65°F to 350°F SAE Specifications: 20R3, Class A P/N ID (in.) DY 80251GL 5/8 DY 80252GL 3/4 DY 80254GL 1 GOLD LABEL® SILICONE HEATER HOSE 50 FT. ROLLS HEATER HOSE (sold by the foot) STANDARD HEATER HOSE Designed for heater hose applications where resistance to antifreeze coolants and underhood temperatures is required. Temperature Range: -40°F to 257°F (-40°C to 125°C) SAE Specifications: Similar to SAE 20R3 P/N ID (in.) DY 80259 3/8 DY 80270 1/2 DY 80271 5/8 DY 80273 3/4 BLUE HEATER HOSE WITH XTREME HEAT TECHNOLOGY Designed for heater hose applications that are exposed to higher underhood temperatures and require a higher heat resistance. Temperature Range: -40°F to 300°F (-40°C to 149°C) SAE Specifications: SAE 20R3 Class D3 HT EC Branding: Continental Blue Xtreme ID, SAE J20R3-HT-D3-EC, Made in U.S.A. P/N ID (in.) GY 65028 3/8 GY 65029 1/2 GY 65031 5/8 GY 65033 3/4 GY 65035 1 GY 65037 1-1/4 August 2023 (16Zerostart) P/N Size Color Strength PG AF9101 1 Gallon Purple (Pink) Full PG AF9155 55 Gallon Purple (Pink) Full PG AF9501 1 Gallon Purple (Pink) 50/50 PG AF9555 55 Gallon Purple (Pink) 50/50 SCA PRE-CHARGED Prime® Conventional “Green” Coolant Also Available EXTENDED LIFE COOLANT P/N Size Color Strength PG AF9701 1 Gallon Red Full PG AF9755 55 Gallon Red Full PG AF9901 1 Gallon Red 50/50 PG AF9955 55 Gallon Red 50/50 • Service Life 1,000,000 miles/20,000 hours - HD applications only • Cor-Guard™ Increases Uptime • NON-2EH (OAT) Formulation, compatible with Any Nitrite Free HD Organic Acid Technology (OAT) P/N Size Color Strength PG AFC13000/F 1 Gallon Red Full PG AFC13000-55/F 55 Gallon Red Full PG AFC13100/F 1 Gallon Red 50/50 PG AFC13100-55/F 55 Gallon Red 50/50 NITRITE FREE COR-GUARD® EXTENDED LIFE ANTIFREEZE/COOLANT Note: due to supply shortages product substitutions may be required.

RkJQdWJsaXNoZXIy MTEyNjY3NA==